Menus
Others
139
LSQT1025
∫[RECLAMP]
≥ OFF ≥ ON
The recording lamp lights during recording and
flashes when the unit receives a signal from the
remote control. When this is set to [OFF], it
does not light during recording.
∫[DISPLAY]
≥ OFF ≥ ON
The screen indications are selected as shown
in the illustration below.
∫[ POWER SAVE]
≥ OFF ≥ 5 MINUTES
[OFF]:
The power saving function is not activated.
[5 MINUTES]:
When about 5 minutes passed without any
operation, this unit automatically turns off to
prevent the battery from running down. When
you use this unit, turn it on again.
≥In the following cases, the unit may not turn
off even when you set this to [5 MINUTES].
– When using the AC adaptor
– When connecting the unit to a computer or
printer via the USB cable
∫[ BEEP SOUND]
≥ OFF ≥ ON
This allows operations such as starting and
ending recording to be signaled by a beep.
When [OFF] is set, no beep is heard when an
operation such as recording is started or
ended.
1 Beep
When you start recording
When you turn on the power
When this unit is recognized by the computer or
the printer, etc.
2 Beeps
When you pause recording
When you turn off the power
2 Beeps for 4 times
When an error occurs e.g. recording not
starting. Check the sentence displayed on the
screen. (l144)
∫[ INITIAL SET]
≥ YES ≥ NO
When there is a menu that cannot be selected
depending on a combination of functions, set to
[YES] for changing the menu settings back to
the initial shipping condition.
(Language setting cannot be back to the initial
shipping condition.)
Other menus
OFF
ON
;
;
R 0h00m
0h00m00s
SP
LSQT1025(ENG).book 139 ページ ２００６年２月４日　土曜日　午後６時１０分