With other products
With a printer (PictBridge)
115
LSQT1025
With a printer (PictBridge)(SD)
To print pictures by directly connecting this unit to the printer, use a printer compatible with
PictBridge. (Read the operating instructions for the printer.)
≥Use the AC adaptor to free you from worrying about the battery running down.
¬Insert an SD card with recorded images in the unit, turn on the unit and then
rotate the mode dial to select .
1 Press the MENU button, then select [ SETUP]
# [ USBFUNCTI ON] # [PictBridge] and press
the joystick.
≥Press the MENU button to exit the menu screen.
2 Connect this unit and a printer.
The [ ] indication appears on this unit’s
screen.
≥If the [ ] indication does not appear or
continues to flash, disconnect and then reconnect the
USB cable or check the printer, SD card and settings on
this unit.
≥Do not use any other USB cables except the supplied
one. (Operation is not guaranteed with any other USB
cables.)
3 Select a file to be printed, then press the joystick.
The number of pictures set is displayed.
AUSB cable (supplied)
≥Insert the plugs as far as they will go.
A
LSQT1025(ENG).book 115 ページ 2006年2月4日 土曜日 午後6時10分