Panasonic VDR-D250GN, VDR-D300GN With a TV, Playback on TV, 110, Connect this unit and a TV

Models: VDR-D250GN VDR-D300GN

1 168
Download 168 pages 19.01 Kb
Page 110
Image 110

LSQT1025(ENG).book 110 ページ 2006年2月4日 土曜日 午後6時10分

With a TV

With a TV

Playback on TV

(RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD)

The motion pictures and still pictures recorded by this unit can be played back on a TV.

Use the AC adaptor to free you from worrying about the battery running down.

1 Connect this unit and a TV.

AAV/S cable (supplied)

Insert the plugs as far as they will go.

*If the TV has an S Video terminal, also connect the S Video plug to it. This allows you to enjoy more beautiful pictures.

A

SVIDEO IN* VIDEO IN

AUDIO IN

With other products

2Turn on this unit, then rotate the mode dial to select or .

3Change the input channel on the TV.

≥ The channel set will differ depending on the terminal to which the unit is connected.

4Start playback on this unit.

The image and audio are output on the TV.

If the image or audio from this unit is not output on the TV

≥ Check that the plugs are inserted as far as they go. ≥ Check the connected terminal.

Check the TV’s input setting (input switch). (For more information, please read the operating instructions for the TV.)

If the images are not displayed correctly on a wide- screen TV, adjust the aspect setting on the TV. (Refer to the operating instructions of the TV for details.) If the pictures are displayed squeezed horizontally on a regular TV (4:3), change the [TV ASPECT] setting on this unit. (l 111)

110

LSQT1025

Page 110
Image 110
Panasonic VDR-D250GN, VDR-D300GN With a TV, Playback on TV, 110, Connect this unit and a TV, Start playback on this unit