Installation
128
LSQT1025
With a computer
1 Insert the CD-ROM into the computer.
The [Setup Menu] screen will appear.
≥If the [Setup Menu] screen does not appear, double-click the CD-ROM
drive icon in [My Computer].
2 Click [DVDfunSTUDIO 2.4].
≥The software application may not run properly if you cancel the
installation at any point e.g. by pressing [Cancel].
≥Depending on the operating environment, you may be required to install
DirectX 9.0b. If so, click [Yes], and install it.
If you install the software in a computer that is not compatible with
DirectX 9.0b or 9.0c, the computer may not work properly. If you are
unsure whether or not your computer is compatible, contact the maker of your computer.
3 Click [Next].
4 Select [PAL (Europe)] for the TV system, click [Next].
5 Click [Next].
Continue to follow the on-screen messages to install it.
6 Click [Finish].
Installing DVDfunSTUDIO
The computer must be rebooted for the application to work.
LSQT1025(ENG).book 128 ページ ２００６年２月４日　土曜日　午後６時１０分