TANDBERG T2000 MXP user manual Streaming, Source, Allow Remote, Start, Announcements, Video Rate

		General Use
		Auto: Enables streaming of both local and far end video.
Streaming
Source*		Selection of which site to be streamed is done using voice
		switching (the site that speaks is streamed).
		Local: Only the local video will be streamed.
		Remote: Only the far end video will be streamed.

Local and far end audio is always streamed.

Allow Remote		On: Streaming can be started from external user interfaces like
Start		the Web-browser or Telnet session.
		Off: Streaming can only be started from the Video Conferencing
		System User Interface using the remote control, or by using the
		Data port. This will prevent activation of streaming using Web
		browser or Telnet sessions. See also Password section below

Announcements

On: The codec will announce to the network that it is streaming.

This enables’ a streaming client (e.g. a PC) to connect to the

codec s streaming session. Used by Cisco IP/TV. Off: No announcement packets will be transmitted.

Video Rate

Defines the Video streaming rate from the system. Range is 16 kbps - 320 kbps. In addition, audio (G.711) streaming rate is 64 kbps, providing a maximum streaming rate of 384 kbps.

Streaming Password

Set password so that only participants entering correct password will be able to view the streaming session. Entering a password will prevent unauthorized people from accessing the streaming session.

*The streaming source setting is not available when streaming only is supported outside a call.

37