Administrator Settings

4.5.4Stereo Settings

Stereo Input Mode (stereo audio)

If Stereo Input mode is on, Audio in 3 and 4 (VCR Left/Right) will behave as a stereo input pair. The VCR Ducking and AGC setting for VCR will in this case apply to both Audio in 3 and 4.

Audio out to the left loudspeaker will be a mix of Audio in 3 (VCR Left) the far end signal (left or mono), and Audio out to the right loudspeaker will be a mix of Audio in 4 (VCR Right) and the far end signal (right or mono).

If Stereo Input Mode is off, Audio out to both loudspeakers will be a mix of Audio in 3 and 4 and the far end (mono or left+right).

If the system is connected to a Digital NAM, stereo sound on the loudspeakers shall be present if a stereo input signal is connected to the inputs VCR-Left and VCR-Right or a stereo signal is received from the Far End.

If the system is not connected to a Digital NAM, stereo sound on the loudspeaker outputs will bepresent in the following situations:

If system is idle and a stereo input signal is connected to the inputs VCR-Left and

VCR-Right.

If system is in a call with mic off and a stereo input signal is connected to the inputs

VCR-Left and VCR-Right, or a stereo signal is received from the Far End. Otherwise the Loudspeaker Left signal will be equal to Loudspeaker Right.

153

Page 163
Image 163
TANDBERG T2000 MXP user manual Stereo Settings, Stereo Input Mode stereo audio