TANDBERG T2000 MXP user manual Dvd / Vcr, DVD/VCR Playback Mono, Stereo

Models: T2000 MXP

1 261
Download 261 pages 57.32 Kb
Page 208
Image 208

D1337703_T2000_MXP_User_Manual

5.3 DVD / VCR

DVD/VCR Playback

Mono

For playback, connect a cable between Video Out on the VCR and Video In (VCR) on the system. Connect a cable between Audio Out on the VCR and the Audio In (VCR) on the system. Choose VCR from the Presentation menu to activate the VCR input.

Make sure that Audio In (VCR) is On (see chapter Audio). If audio from VCR is too low, this level can be adjusted in Audio Settings, Inputs, Level Settings. The audio from the VCR will be audible in the local speaker system.

The audio from the VCR and your microphone(s) will be mixed and sent to the far end. When a person talks on either local or far end, the VCR audio level will be reduced to make it easier to comment on a video recording when Audio Settings, VCR Ducking: On.

Stereo

For stereo playback, connect:

 

 

Video cable between Video Out on the VCR and Video In (VCR) on the system

 

 

Audio cable between Audio Out (L) on the VCR/DVD and the VCR L (Audio In 3)

 

 

Audio cable between Audio Out (R) on the VCR/DVD and VCR R (Audio In 4)

 

 

Choose the VCR video source (se chapter Presentation menu) to automatically

 

 

 

activate the VCR audio and video input.

Make

sure that:

 

 

Stereo Input Mode is set to On (see chapter Stereo Settings)

 

128 AAC-LD is enabled (see chapter AAC-LD 128 kbps)

 

AAC-LD is enabled (see chapter Audio Algorithm)

 

Audio In (VCR) is On (see chapter Audio). If audio from VCR is too low, this level can be

 

 

adjusted in Audio Settings, Inputs, Level Settings. The audio from the VCR will be audible

 

in the local speaker system.

 

To enable VCR/DVD ducking (reduce volume when speaking), check that VCR Ducking

under Audio Settings is set to On.

Note that the audio from the VCR/DVD and your microphone(s) will be mixed and sent to the far end. When a person talks on either local or far end, the VCR/DVD audio level will automatically be reduced to make it easier to comment on a video recording when Audio Settings, VCR Ducking: On.

Note that a system with one video output and one mixed (local and far end) audio output is required for recording. For playback, a system with one video input and one audio input without integrated echo cancellation is required.

198

Page 208
Image 208
TANDBERG T2000 MXP user manual Dvd / Vcr, DVD/VCR Playback Mono, Stereo