
Administrator Settings
4.5.1Inputs
Mic 1- 2 and Audio input 3-4
By default, all inputs are enabled. Just plug in an audio source and it is active. Audio inputs that are On will automatically be mixed. Unconnected inputs will automatically be muted. Select Off to prevent audio/noise from connected but unused inputs. The activated audio sources are stored on camera presets.
Mic 1 and 2 are intended for electret type microphones. The microphone inputs are balanced with 24V phantom power.
Audio inputs
Mix Mode
Auto The adjustment of each microphone signal is done automatically to obtain the best possible audio and minimize the background noise.
Fixed
Fixed will maintain a constant weighting of all microphones.
VCR Ducking
If VCR Ducking is activated, the VCR audio level will be attenuated if someone talks into the microphone or at the far end.
The VCR ducking is only valid for audio input 4. If input 3 and 4 is configured to one stereo input pair, see Stereo Settings, then the VCR ducking will apply to both input 3 and 4.
Level Settings
It is possible to adjust the audio input levels according to which external audio equipment is connected. The
The default levels for Mic 1 and 2 are set for use with an Audio Technica AT871R or AT841R microphone in an average videoconferencing room. The gain can be adjusted correctly for a wide range of microphones.
A few examples of microphone levels are:
Audio Technica AT871R | +3dB (default) |
Audio Technica AT851R | +7dB |
149