TANDBERG T2000 MXP ISDN BRI warnings, IP network quality warnings, ISDN PRI warnings

D1337703_T2000_MXP_User_Manual

3.13.1.7 Warnings

If any warnings registered by the system it will be displayed in the Warnings menu. Open a warning in the list to get more information about the warning.

The following warnings are displayed if detected by the system:

ISDN BRI warnings

ISDN is enabled on BRI line x, but the line is not connected. Please check your network

connection or disable the line. (101)

There is something wrong with ISDN BRI line x. Please check your network connection. (102)

IP network quality warnings

The system is experiencing packet loss in the IP network. This may affect the quality of

the call.

The system is experiencing high jitter in the IP network. This may affect the quality of the

call.

The system is dropping IP packets due to latency in the network. This may affect the quality of the call.

ISDN PRI warnings

ISDN PRI is configured for this system, but the line is not connected. Please check your

network connection or disable the network. (131)

There is something wrong with the ISDN PRI line (Blue alarm). Please check your

network connection. (132)

There is something wrong with the ISDN PRI line (Yellow alarm). Please check your

network connection. (133)

There is something wrong with the ISDN PRI line (D-Channel not active). Please check your network connection. (134)

External Network warnings

External Network is configured for this system, but the line is not connected. Please check your network connection or disable the network. (161)

Leased E1/T1 warnings

Leased E1/T1 is configured for this system, but the line is not connected. Please check

your network connection or disable the network. (191)

There is something wrong with the Leased E1/T1 line (Blue alarm). Please check your

network connection. (192)

There is something wrong with the Leased E1/T1 line (Yellow alarm). Please check your network connection. (193)

96