D1337703_T2000_MXP_User_Manual
3.10.6Camera Tracking
Through Camera Tracking and the use of two or three microphones, the camera can automatically position itself on the current speaker. Before using camera tracking, the camera positions used must be stored at Preset 7 (Mic1) and Preset 8 (Mic2).
How to use Camera Tracking:
1.Select the Camera Control icon in the main menu.
2.Enable Camera Tracking by choosing Camera Tracking. An indicator will appear on the screen.
3.End Camera Tracking by deselecting the Camera Tracking button. Camera Tracking will also end if you activate a camera preset or move the camera manually with the arrow keys.
Example: You have placed Microphone 1 on the table. Where should you position the camera for Preset 7?
The camera position stored at Preset 7 must be related to Microphone 1. Therefore all participants who are located closest to Mic1 should be included in the Preset 7 camera position etc. When camera tracking is activated and a person close to Mic1 speaks, Preset 7 will be automatically selected.
When activating another video source (for instance document camera), camera tracking will be temporarily disabled until you
The camera tracking speeds may be altered in the Video Settings menu in Administrator Settings, see Camera Tracking Mode for further details.
A Voice Detector makes the system more tolerant of noise and ensures the camera not to be moved by noise such as paper shuffling, etc.
Note that pressing Mic Off will temporarily disable camera tracking until you turn on the microphone again.
64
