●Connection to Internet (Type 3)

The PC accesses the camera through the Internet and
the DSL/CATV modem.
Necessaries:
•Straight-type network cable (Category 5)
•CATV modem (cable modem) or DSL modem

●Connection to Internet (Type 4)

A switching hub or a router may be added to type 3
connection.
Necessaries:
•Straight-type network cable (Category 5)
•CATV modem (cable modem) or DSL modem
•Switching hub or router (10BASE-T/100BASE-TX
applicable)
Notes:
•Setting the router is required when connecting more
than one camera. Refer to the manual included with
the router.
•The camera does not support the PPPoE. Use a
router that handles PPPoE when connecting the
camera using that protocol.
•A global-type IP address is required when connect-
ing via the Internet.
■Network Connection Types
Prior to connections, specify the connection type and
prepare relevant devices and cables.
Notes:
•We recommend that you use connection type 1 or
type 2 when setting up the network address of the
camera.
•Be sure to unplug or switch all the devices off, then
start connections.

●Direct Connection to PC (Type 1)

Use a cross-type network cable in the category 5 to
connect the camera directly with the PC.
Necessaries: Cross-type network cable (Category 5)

●Connection to Intranet (Type 2)

A switching hub connected to the intranet is placed
between the camera and the PC.
Necessaries:
•Straight-type network cable (Category 5)
•Switching hub or router (10BASE-T/100BASE-TX
applicable)
-15-
Network Cable (Cross type)
PC
Network Cable
(Straight type)
(16 clients maximum)
Switching Hub
PC
Network Cable
(Straight type)
Network Cable
(Straight type)
Internet
DSL/CATV Modem
PC
(16 clients maximum)
Switching Hub or Router
PC
(16 clients maximum)
Network Cable
(Straight type)
Internet
DSL/CATV Modem