Panasonic WV-NW502S, WV-NW502SK - page 16

16
TOP
LINK ACT
ABF
ABF
INITIAL
SET
MONITOR
OUT
SD CARD/
L
O
C
K
LINK ACT
ABF
ABF
INITIAL
SET
MONITOR
OUT
SD CARD/
SDHC/SD
memory card slot
Tilting lock screw Panning lock screw
Panning table
Camera fixing screw
INITIAL SET
button
Monitor out connector
for adjustment
Link LED
(Lights when the connection
is being established)
Access LED
(Blinks when accessing a network)
SDHC/SD memory card error LED/ABF LED
(Blinks when ABF is being performed)
Auto-back-focus
button
• About the [INITIAL SET] button
Turn on the power of the camera while holding down this button, and wait for around 5 seconds
without releasing this button. Wait around 2 minutes after releasing the button. The camera will
start up and the settings including the network settings will be initialized. Before initializing the
settings, it is recommended to copy down the settings in advance.