22
Important:
• When mounting the camera body, cables
shall be run between the camera attach-
ment and camera mount bracket as indi-
cated by the arrow in the illustration.
* Cable running as indicated by the arrow
is an example. Cable running shall be
varied with installation environment.
wEngage the rear-side screw of the cam-
era with the screw hole of the camera
attachment and rotate the camera in the
direction of the arrow to secure the cam-
era to the camera attachment.
Confirm that the embossed part of the
camera attachment is set in the "LOCK"
position.
eConnect the cables at the side of the
mount bracket. (☞page 29)
Waterproof the connecting portion.
(☞page 32)
Note:
• Disconnect the 12 V power source and
PoE power source to prevent power from
being supplied during mounting work.
LOCK
OPEN
LOCK
OPEN
Projection
LOCK
OPEN
LOCK
OPEN
Protrusion
Make cable
connections.