Panasonic WV-NW502S, WV-NW502SK x, c

24

xRemove the enclosure and inner

dome from the main body by loos-

ening the three fixing screws.

Loosen the three fixing screws by using

the provided bit for tamperproof screw.

Detach the inner dome while pushing the

parts with the "PUSH" indication.

Important:

•Do not hold the inner dome when carry-

ing the camera. Otherwise, the camera

part may fall and it may damage the

camera.

cMount the lens (WV-NW502SK)

qBefore mounting the lens, remove the protection sheet from the camera.

wRefer to the operating instructions of the lens for how to mount the lens.

eMount the optional lens to the camera by turning the lens clockwise.

L

O

C

K

PUSH

PUSH

Press the parts with the

"PUSH" indication.

W

T

Contents

Main CAUTION Contents Important safety instructions Limitation of liability Disclaimer of warranty Preface Main functions About the user manuals System requirements for a PC Trademarks and registered trademarks About copyright and licence Network security Precautions [Precautions for use] Page Precautions for Installation Page Major operating controls and their functions Page Preparations Using a two-gang junction box Using supplied mount bracket z x c the bracket. Camera installation z Page Page x dome from the main body by loos- ening the three fixing screws. c v with the camera fixing screw (red, 1position). b n Adjust the camera z x c v Connection z x (for use of the audio transmission function). c v b Waterproof treatment for the cable joint sections Page Connection example when connecting to a network using a PoE hub Configure the network settings Install the software Configure the network settings of the camera using the Panasonic IP setting software z x c Troubleshooting Before asking for repairs, check the symptoms with the following table. Specifications Basic Camera Lens (WV-NW502S) Network Page Page Standard accessories Optional accessories