25
rInsert the connector of lens into the connector of camera.
vSecure the camera to the bracket
with the camera fixing screw (red,
1position).
The illustration is an example of using
the accessory camera mount bracket.
Important:
•Be sure to tighten the camera fixing
screw.
Failure to observe this may cause cam-
era trouble due to water leakage or cam-
era falling.
(Recommended tightening torque:
0.78 N·m {0.58 lbf·ft})
bRemove the screw for transport pro-
tection (blue, 1 position)with a
Phillips screw driver.
W
T
L
O
C
K
Screw for transport
protection (blue)
TOP
L
O
C
K
INITIAL
SET
ONITOR
OUT
Camera fixing screw (red)
* The camera fixing
screw shall be
securely tightened.