Panasonic WV-NW502S, WV-NW502SK

rAccommodate the connected cables

inside the cable guide of the camera

mount bracket.

Important:

•To prevent the cables from being caught

when the cover is attached, keep the

cables inside the cable guide.

tAttach the base cover.

Cable guide

Connected cable

Cable guide

Base cover

Base cover fixing screw

yUse the bit for tamperproof screw

(accessory) to tighten the fixing screws

provided on both sides of the base

cover.

(Recommended tightening torque:

0.78 N·m {0.58 lbf·ft})

Contents

Main CAUTION Contents Important safety instructions Limitation of liability Disclaimer of warranty Preface Main functions About the user manuals System requirements for a PC Trademarks and registered trademarks About copyright and licence Network security Precautions [Precautions for use] Page Precautions for Installation Page Major operating controls and their functions Page Preparations Using a two-gang junction box Using supplied mount bracket z x c the bracket. Camera installation z Page Page x dome from the main body by loos- ening the three fixing screws. c v with the camera fixing screw (red, 1position). b n Adjust the camera z x c v Connection z x (for use of the audio transmission function). c v b Waterproof treatment for the cable joint sections Page Connection example when connecting to a network using a PoE hub Configure the network settings Install the software Configure the network settings of the camera using the Panasonic IP setting software z x c Troubleshooting Before asking for repairs, check the symptoms with the following table. Specifications Basic Camera Lens (WV-NW502S) Network Page Page Standard accessories Optional accessories