■Control of the device control ter- minals
The device control terminals of the center module can be controlled through the Order Taker.
1.Hold down the C button. A short beep is heard from the speaker of the headset and a connection will be made toward the device control terminals of the center mod- ule.
Hold down
2.Release the C button. A short beep is heard twice from the speaker of the headset and the connection will be disconnected toward the device control terminals of the center module.
Release
■Double-Drive-Thru connections
When
<For Normal setup>
1.When a connection is made to Lane A, the lane indicator is lit in yellow. Press the T2 button if you want to make a connection changeover to Lane B. When connected to Lane B, a voice of [Lane B] is heard from the speaker of the headset and the lane indicator is lit in green.
Press
2.While a connection is maintained to Lane B, the lane indicator is lit in green. Press the T2 button if you want to make a connection changeover to Lane A. When con- nected to Lane A, a voice of [Lane A] is heard from the speaker of the headset and the lane indicator is lit in yel- low.
Press
<For Direct Lane Select setup>
1.While a connection is maintained to Lane A, the lane indicator is lit in yellow. Press the T2 button if you want to make a connection changeover to Lane B. When con- nected to Lane B, a voice of [Lane B] is heard from the speaker of the headset and the lane indicator is lit in green.
Press
2.While a connection is maintained to Lane B, the lane indicator is lit in green. Press the T1 button if you want to make a connection changeover to Lane A. When con- nected to Lane A, a voice of [Lane A] is heard from the speaker of the headset and the lane indicator is lit in yel- low.
Press
Note: When Direct Lane Select is set, TALK is available by selecting either lane pressing T1 or T2 button.
11
