SETTING UP THE PANTHER LS8
AND USING FILE MANAGER
The Setup Menu
The setup menu is used to modify the default printer settings. The setup menu should be accessed from the home screen. To access the setup menu
press the 
key.
Use the setup menu to adjust the contrast, heat, time, date, units, language, and bar code settings. Also use the setup menu to transfer files to a personal computer or to upgrade your printer’s operating system.
Within the setup menu, scroll up or down using the directional arrows. Select the setting to adjust by pressing ENTER. Once inside the setting, use the arrow to select a parameter to change. Press ENTER to accept the changes and return to the main setup menu screen.
Press SETUP to exit from the setup menu will all changes.
Label Modes
To edit the label mode, press the LABEL key.
1.Use the up or down directional arrows to select the desired mode and press ENTER.
Available Modes include:
MODE | DESCRIPTION | APPLICATIONS |
|
|
|
Component | Vertically centers legend | Electrical components |
Wiremarker | Repeats legend until label is filled | Wire and cable marking |
Terminal | Places legends at terminal | Terminal blocks |
| locations |
|
Tape | Rotates legends 90° clockwise | Safety/facility ID, pipe |
|
| marking |
Strip | Repeats legend until label is filled | Wire and cable marking |
| and copies legend on two sides of |
|
| middle perforation |
|
Network | Places legends at port locations | Data communications |
|
| components |
Flag | Prints legend once at top of label | Wire and cable marking |
| and then repeats the legend once |
|
| at the bottom of label |
|
Vertical | Prints legend vertically | Safety/facility ID, pipe |
|
| marking |
30
