FIGURE 8

TOP BOOM

3/8” THREADED ROD

 

3/8” WASHER

3/8 X 1/2” SPACER

3/8” HEX NUT

2”PULLEY

 

 

3/8” LOCK NUT

STEP 8

Remove two 2” PULLEYS (5) to the rear bracket on the TOP BOOM using one 3/8” THREADED SHAFT (9), two 3/8” WASHERS, two 3/8” HEX NUTS (8), and two 3/8” LOCK NUTS (7) as shown in FIGURE 8.

Discard the two 3/8 X 1/2” SPACERS.

FIGURE 9

TOP BOOM

 

3/8” THREADED ROD

ELASTIC

3/8” HEX NUT

3/8” WASHER

CORD

2”PULLEY

 

3-1/2” PULLEY

 

3/8” LOCK NUT

STEP 9

SECURELY assemble the two previously removed 2” PULLEYS, one previously removed 3/8” THREADED SHAFT, one previously removed 3-1/2” PULLEY, two previously removed 3/8” WASHERS, two previously removed 3/8” HEX NUTS, and two previously removed 3/8” LOCK NUTS to the rear bracket on the TOP BOOM as shown in FIGURE 9.

Position the elastic cords over the 2” PULLEYS as shown in FIGURE 9.

7

Page 7
Image 7
ParaBody 445104 manual TOP Boom Threaded ROD Washer