FIGURE 24

3/8 X 2-3/4”

55

 

56

4

 

 

31

 

 

 

6

63

39

 

 

50

 

4-1/2” 38

 

3/8 X 2-3/4”

55

 

STEP 24:

Route the ARM CABLE (31) through the RIGHT ARM (6) as shown in FIGURE 24.

Assemble one 4-1/2” PULLEY (38) to the RIGHT ARM (6) using one 3/8 X 2-3/4” BOLT (55), two 3/8 X 1/2” SPACERS (50) and one 3/8” LOCK NUT (63). See FIGURE 24. (Note: Loop the ARM CABLE around the PULLEY prior to assembling the

RIGHT ARM.)

Assemble one V-PULLEY (39) to the RIGHT ARM SUPPORT (4) using using one 3/8 X 2-3/4” BOLT (55) and one 3/8” LOCK NUT (63). See FIGURE 24. (Note: Loop the ARM CABLE around the PULLEY prior to assembling the RIGHT ARM

SUPPORT.)

SECURELY assemble one 2” NYLON SPACER (56) to the RIGHT ARM SUPPORT (4) using one 3/8 X 2-3/4” BOLT (55) and one 3/8” LOCK NUT (63). See FIGURE 24.

Assemble the RIGHT ARM (6) to the RIGHT ARM SUPPORT (4) using one 3/8 X 2-3/4” BOLT (55) and one 3/8” LOCK NUT (63). See FIGURE 24. (Note: Make sure the ARM CABLE runs in FRONT of the bolt as shown!.)

21

Page 21
Image 21
ParaBody 777 manual Right ARM, Support