ParaBody 883 manual Pulley Plates

		PULLEY PLATES
8
BASE	8	17
FRAME
		24
		1
PEDESTAL		13 3/8 X 1-3/4”
FIGURE 14

STEP 14:

•Assemble the LEG CABLE (8) to the PEDESTAL and route the LEG CABLE (8) thru the BASE FRAME as shown in FIGURE 14.

(NOTE: Remove pulleys for ease of installation.)

•Route the LEG CABLE (8) around the 3-1/2” PULLEY on the PULLEY PLATES using one existing 3/8 X 1-3/4” BOLT and one existing 3/8” LOCK NUT. See FIGURE 14.

•Securely assemble the threaded end of the LEG CABLE (8) to the THREADED HOUSING (24) then assemble the THREADED HOUSING (24) to the bracket on the STACK BASE (1) using one 3/8 X 1-3/4” BOLT (13) and one 3/8” LOCK NUT (17) as shown in FIGURE 14.

	1/2		1/2		1/2		1/2		1/2		1/2
0		1		2		3		4		5	6

14