FIGURE 12 |
|
BOOM PLATE |
|
| FRAME |
3”NYLON SPACER |
|
REAR UPRIGHT | 2” |
| NYLON |
| SPACER |
STEP 12:
•CAREFULLY remove the BOOM PLATE (10) from the the REAR UPRIGHT and the FRAME as shown in FIGURE 12. Discard the
BOOM PLATE.
FIGURE 13 |
|
2 | FRAME |
| |
2”NYLON | BOOM BRACKET |
| |
SPACER |
|
| 3 |
| REAR |
| UPRIGHT |
STEP 13:
•Swing the GUIDE RODS (3) into the guide rod bushings in the LEFT BOOM BRACKET (2) as shown in FIGURE 13.
•SECURELY assemble the LEFT BOOM BRACKET (2) and the BOOM BRACKET to the REAR UPRIGHT and the FRAME using the previously removed bolts, nylon spacers, washers and lock nuts as shown in FIGURE 13. (NOTE: The 2” NYLON SPACERS go on the LEFT BOOM BRACKET only.)
| 1/2 |
| 1/2 |
| 1/2 |
| 1/2 |
| 1/2 |
|
| 1/2 |
0 | 1 | 2 | 3 | 4 | 5 | 6 | ||||||
23
