Paradyne 3165 DSU/CSU manual Port Configuration Options 1

Table 1. Port Configuration Options (1 of 2)

Option	Factory 1	Factory 2	Comments/Description
	E530	E530
	V.35	V.35	Selects the port type: EIA-530A,
Port Type:
	RS449	RS449	V.35, RS449, or X.21.
	X.21	X.21
	Nx64	Nx64	Enables the port to either Nx56 or
Base Rate:
	Nx56	Nx56	Nx64 rates.
	Disab	Disab
	V.54	V.54	Network-initiated DCLB, allows
Net DCLB:			DCLB to be controlled by inband
	FT1	FT1
			V.54 or FT1 (ANSI) codes.
	Both	Both
	Disab	Disab
	DTLB	DTLB	Port-initiated Loopbacks, allows
Port LB:			Loopbacks to be initiated through
	DCLB	DCLB
			the port by the external DTE.
	Both	Both
	Disab	Disab
	DTR	DTR	All ones sent to network (DTE) T1
All Ones:
	RTS	RTS	when DTR or RTS interrupted.
	Both	Both
Rcv Yellow:	None	None	Data port remains enabled, or is
			disabled, on receiving Yellow on
(Received Yellow)	Halt	Halt
			network T1.
	Int	Int	Selects whether the transmitted
Tx Clock:			data clock is internal (TXC) or
	Ext	Ext
			external (XTXC).
InvertTxC:	Enab	Enab	Selects phase inversion of the
(Invert Tx Clock)	Disab	Disab	transmit clock (TXC).
	Enab	Enab	Allows the data on the port to be
InvertData:
	Disab	Disab	inverted.

4