Call Setup Branch
10-73910-A2-GN32-40 September 1998
Press the key until Change_Directory appears. Press any function key to select
Change_Directory.
F1
01:551234z
Nxt " #
F2 F3
The phone number listed in directory location 1 appears. Select Nxt to display other directory
locations.
Entering Telephone Numbers and Dial Command Modifiers into Directory Locations
The following example uses an empty directory location for describing how to enter a telephone
number. If you want to change an existing telephone number in any of the 24 directory locations,
follow the same procedures.
To add a telephone number to a directory location, make the following selections:
F1
02:z
Nxt " #
F2 F3
Select Nxt until a blank directory appears on the LCD. (The cursor ( _ ) always appears in the
first character position.)
Select F2 ( ") or F3 ( #) until the desired character is selected. This can be an alpha or numeric
character.
F1
02:z
Nxt " #
F2 F3
Press the key to move the cursor to the next character position.
Continue this key sequence until the dial command modifiers and telephone number are entered.
(Refer to Table 10-1 for a list of valid dial command modifiers.)
F1
01:9W5556789z
Nxt " #
F2 F3