DCP Configuration
5-53910-A2-GN32-40 September 1998
The Configure branch consists of the following three levels:
Ld EditArea frm. Allows the selection of the Active (Operating), Active (Saved),
Customer 1, Customer 2, and Factory configuration areas.
Choose Function. Allows you to make changes (Edit) to existing configuration options or
write (Save) these changes to either the Active (Saved), Customer 1, or Customer 2.
Edit Strap Group. Contains the eight software configuration option groups that determine
how the modem operates, plus the Security group, which can be viewed but not changed
using this branch.
Editing and Saving a Configuration Option
The following example shows how to change the Remote Access Password using the DCP. (If you
intend to access another 3900 Series modem via the Remote branch of the Top-Level menu, the
Remote Access Password must be the same for both modems.) By following these procedures you
learn how to load a factory preset configuration area (in this case, Sync Leased), how to edit a
configuration option (Remote Access Password), and how to save changes to a configuration area
(Active (Saved)). The shaded key indicates what key to press.
F1
Leased:19.2
Status Configure
F2 F3
Select Configure from the Top-Level menu.
F1
LdEditAreafrm >
Activ(Operating)
F2 F3
F1
LdEditAreafrm <
Factory
F2 F3
Scroll across the LCD and select the Factory configuration area.