Paradyne 7800-D1-999 manual Overview, Features

TM

OneVision

ACCULINK Access Controller Manager for HP OpenView

Feature Number 7800-D1-999

Document Number 7800-A2-GZ50-10

January 1997

Overview

The OneVision ACCULINK
Access Controller (AAC) Manager supports the ACCULINK Access Controller under HP OpenView. It provides the means to administer the AAC device, accept traps from it, and gather performance data.

This feature document provides instructions on:

•How to prepare for and install the OneVision AAC Manager software on both HP
and Sun
workstations

•How to remove the installed software if necessary

•How to assist and/or accelerate the process of discovering AAC devices for the HP OpenView Map

•How to cut through to the AAC Terminal Interface

•How to upload or download configuration images from or to the AAC

•Which SNMP traps are generated by the AAC

This document assumes that you have a working knowledge of UNIX
and HP OpenView. If you are not familiar with the general use of HP OpenView, refer to your HP OpenView documentation for a description of the user interface.

Features

The AAC Manager provides the following features:

•Discovery and addition of AAC devices on a network map

•Cut-through from HP OpenView to the AAC for configuration, diagnostics, and device performance evaluation

•AAC configuration image transfer allowing storage of AAC device options on HP OpenView for use in disaster recovery

•Simple Network Management Protocol (SNMP) trap handling

1