ix

9820-A2-GB20-20 June 2000
About This Guide

Purpose and Intended Audience

This document contains information needed to properly set up, configure, and
verify operation of FrameSaver SLV in-line monitors. It is intended for system
designers, engineers, administrators, and operators.

Document Organization

Section Description

Chapter 1
About FrameSaver SLV In-Line Monitors.
Identifies how
FrameSaver SLV in-line monitors fit into Paradyne’s SLM
solution, and describes the features of these units.
Chapter 2
User Interface and Basic Operation.
Shows how to
navigate the user interface.
Chapter 3
Configuration Procedures.
Shows how to access and save
configuration options.
Chapter 4
Configuration Options.
Describes the configuration options
available on the units.
Chapter 5
Security and Logins.
Shows how to control access to the
FrameSaver SLV and setting up logins.
Chapter 6
Monitoring.
Shows how to display unit identification
information and perform file transfers, as well as how to
display and interpret status and statistical information.
Chapter 7
FTP Operation.
Shows how to use File Transfer Protocol to
upgrade system software and transfer collected data.
Chapter 8
Troubleshooting.
Provides device problem resolution,
alarm, and other information, as well as troubleshooting
and test procedures.