Paradyne 9820, 9820-2M, 9820-8M, and 9820-45M Entering System Information and Setting the System Clock

Configuration Options
4-4 9820-A2-GB20-20
June 2000
Table 4-1. Easy Install Configuration Options (2 of 2)
Ethernet Port Options Screen
With the cursor on the Ethernet Port Options Screen field, press Enter. The Ethernet
Port Options screen appears. See Configuring the Ethernet Port on page 4-50.
After configuring the Ethernet port configuration options, save your changes. Then
press ESC to return to the Easy Install screen.
Entering System Information and
Setting the System Clock
Select System Information to set up or display the general SNMP name for the
unit, its location, and a contact for the unit, as well as to set the system clock.
Main Menu → Control → System Information
The following information is available for viewing. Save any entries or changes.
If the selection is . . . Enter the . . .
Device Name Unique name for device identification of up to 20 characters.
System Name SNMP system name; can be up to 255 characters.
System Location System’s physical location; can be up to 255 characters.
System Contact Name and how to contact the system person; can be up to
255 characters.
Date Current date in the month/day/year format (mm/dd/yyyy).
Time Current time in the hours:minutes format (hh:mm:ss).
NOTE:
To clear existing information, place the cursor in the Clear field (Tab to the
Clear field) and press Enter.
See Chapter 5,
Security and Logins , to set up and administer logins.