Monitoring
6-14 9820-A2-GB20-20
June 2000

Table 6-9. Device Messages (4 of 5)

Message What To DoWhat It Indicates
Not enough circuits
available A new TS Access DLCI
was selected, but the
maximum number of
network DLCIs or
management PVCs has
already been created.
Delete a DLCI, then create the
new DLCI.
Note: This PVC has
been designated as
the TS Management
Link
The Management PVC you
displayed is defined as the
TS Management Link.
No action needed. The PVC
cannot be modified.
No VCIs available on
VPI All virtual circuits for the
VPI have been assigned in
other DLCI records or
Management PVCs.
Select a different VPI.
Password Matching
Error – Re-enter
Password
Password entered in the
Re-enter Password field of
the Administer Logins
screen does not match
what was entered in the
Password field.
HTry again.
HContact your system
administrator to verify your
password.
Permission Denied
(Seen at an FTP
terminal.)
A file transfer was
attempted, but the:
HUser did not have
Level 1 security. HSee your system administrator
to get your security level
changed.
HWrong file was specified
when the put command
was entered.
HTry again, entering the correct
file with the put command.
HUser attempted to
upload a program file
from the unit.
HEnter the put command
instead of a get command;
you can only transfer files to
the unit, not from it.
See

Upgrading System

Software

in

Chapter 7,

FTP

Operation

.
Please Wait Command takes longer
than 5 seconds. Wait until message clears.
Resetting Device,
Please Wait ... Yes (or y) was entered in
the

Reset COM Port usage

field of the System Paused
menu.
No action needed.