Monitoring
6-12 9820-A2-GB20-20
June 2000

Table 6-9. Device Messages (2 of 5)

Message What To DoWhat It Indicates
File Transfer Failed –
Invalid file

(Seen at an FTP

terminal.)

A file transfer was
attempted, but it was not
successful.
HTry again, making sure you
type the filename correctly.
HExit the FTP session, or
download another file.
See

Changing Software

in
Chapter 7,

FTP Operation

.
Invalid Character (
x
)An invalid character was
entered. Reenter information using valid
printable ASCII characters.
Invalid date: must be
mm/dd/yyyy A non-valid date was
entered on the System
Information screen.
Reenter the date in the
month/day/4-digit year format.
Invalid time: must be
hh:mm:ss A non-valid system time
was entered on the System
Information screen.
Reenter the time in the
hour:minutes:seconds format.
Invalid – Was Already
Active A test was already in
progress when it was
selected.
No action needed.
Invalid Password Login is required and an
incorrect password was
entered; access is denied.
HTry again.
HContact your system
administrator to verify your
password.
Invalid Test
Combination A conflicting loopback or
pattern test was in progress
when Start was selected to
start another test, or was
active on the same or
another interface when
Start was selected.
HWait until other test ends and
message clears.
HCancel all tests from the Test
screen (Path: main/test ).
HStop the test from the same
screen the test was started
from.
IP addresses must be
unique The address entered
matches that of another
NMS already defined.
Enter a different IP address.
Limit of six Login IDs
reached An attempt to enter a new
login ID was made, and the
limit of six login/password
combinations has been
reached.
HDelete another login/password
combination.
HReenter the new login ID.
Limit of Mgmt PVCs
reached New was selected from the
PVC Connection Table and
the maximum number of
management PVCs has
already been created.
HDo not create the
management PVC.
HDelete another management
PVC, and try again.