Manuals
/
Pass Labs
/
Home Audio
/
Stereo Amplifier
Pass Labs
X2.2 owner manual passTM
Models:
X2.2
1
1
10
10
Download
10 pages
58.35 Kb
1
2
3
4
5
6
7
8
<
>
Specs
Error messages
Warranty
The preamplifier’s voltage and current rating are indicated by affixed tag on the bottom of the preamplifier. It will indicate either 240 volts, 220 volts, 120 volts, or 100 volts. A 0.5 amp 3AG slow blow fuse is provided with 100-120volt units, and a 0.25 amp slow blow fuse is provided with 220-240volt units. The frequency rating of the power supply is 50 to 60 Hz in all cases. The preamplifier typically draws less than 30 watts during operation. Please verify that the indicated voltage requirement of this preamplifier is consistent with the voltage at your location
Page 1
Image 1
pass
TM
Aug 10, 2006
X2.2 Owner’s Manual
1
Page 2
Page 1
Image 1
Page 2
Contents
passTM
Introduction
The preamplifier’s voltage and current rating are indicated by affixed tag on the bottom of the preamplifier. It will indicate either 240 volts, 220 volts, 120 volts, or 100 volts. A 0.5 amp 3AG slow blow fuse is provided with 100-120volt units, and a 0.25 amp slow blow fuse is provided with 220-240volt units. The frequency rating of the power supply is 50 to 60 Hz in all cases. The preamplifier typically draws less than 30 watts during operation. Please verify that the indicated voltage requirement of this preamplifier is consistent with the voltage at your location
Description of Operation
control buttons, indicated by up arrows and down v arrows. Above the volume controls are two vertical arrays of 4 LEDs each. This indicator is likely different from what you are accustomed to. We think you will appreciate how easy it is to read from a distance. The left most LED array is decade and the right most array is range. Associated with the volume control is one additional light and a function control button labeled as “MUTE”. In the very lowest volume setting there will be no output and the “Mute” indicator light will be lit. Immediately to the left of the lit “MUTE” indicator the lowermost LED in the range column will also be lit. None of the decade LED’s will be lit, at this time. As you step the volume upward using the up button additional LED’s in the range column will light and the mute LED will extinguish. When you reach the top of the range, the first decade LED will become illuminated, and the range LED will drop back to its lowest indicated setting. And so it goes think of this as a counting system in base
Product Philosophy Other Design Comments
The X2.2 consists of a single chassis
X2.2 Specifications
Warranty Information
Water and moisture Electrical devices should not be used near water as per example, near a bathtub, washbasin, kitchen sink, laundry tub, wet basement or swimming pool . Care should be taken such that objects do not have the opportunity to fall, and that liquid is never spilled onto or into the device enclosure through openings