Cisco Systems DFC3A manual Upgrading the DFC3BXL Daughter Card Memory, Stiffener bracket tabs

Upgrading the DFC3BXL Daughter Card Memory

Figure 9	Removing the DFC3 Daughter Card (WS-X6748-GE-TX Equipped with a Front Stiffener
	Bracket)

Lift here to unseat DFC power connector

Stiffener bracket

WS-X5530-X6748-GE-TX 48 PORT ETHERNET

130151

Stiffener bracket tabs

Upgrading the DFC3BXL Daughter Card Memory

Upgrading your module with a DFC3BXL daughter card requires that you also install a 1-GB memory upgrade (part number MEM-XCEF720-1GB) that comes with your DFC3BXL upgrade kit. This memory upgrade is installed on the module in a small outline dual inline memory module (SODIMM) chip socket located underneath the DFC daughter card. You should install the memory upgrade while the CFC or the DFC daughter card is removed from the module and before you install the DFC3BXL daughter card upgrade.

Catalyst 6500 Series DFC3A, DFC3B, and DFC3BXL Installation Note

78-15893-06 19