Cisco Systems DFC3A, DFC3BXL manual Removing the SODIMM, Location of SODIMM on a WS-X67xx Module

Upgrading the DFC3BXL Daughter Card Memory

Removing the SODIMM

Warning During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly touch the backplane with your hand or any metal tool, or you could shock yourself. Statement 94

To remove the existing SODIMM, follow these steps:

Step 1 Attach an ESD grounding strap to your wrist and to ground. (If you are unsure about the correct way to attach an ESD grounding strap, refer to the “Attaching Your ESD Grounding Strap” section on page 40 for instructions.)

Step 2 Locate the SODIMM on the module. (See Figure 10.)

Figure 10 Location of SODIMM on a WS-X67xx Module

DDR SDRAM

SODIMM

WS-X5530	24PORT GIGABIT ETHERNET			- SFP
WS-X6724-SFP
STATUS
	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	71	18	19	20	21	22	23	24

113340

Catalyst 6500 Series DFC3A, DFC3B, and DFC3BXL Installation Note

20 78-15893-06