Cisco Systems DFC3BXL, DFC3A manual Removing the DFC3 Daughter Card, Heat sinks

Removing the DFC3 Daughter Card

Figure 2 Unseating the CFC Daughter Card Connectors

Heat sinks

WS-X5530	24PORT GIGABIT ETHERNET			- SFP
WS-X6724-SFP
STATUS
	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	71	18	19	20	21	22	23	24

120046

Step 6 Gently lift the CFC daughter card with both hands and remove the CFC daughter card from the module.

Step 7 Place the CFC daughter card on an antistatic mat, antistatic foam pad, or in an antistatic bag.

Step 8 Proceed to the “Installing the DFC3 Daughter Card” section on page 23.

Removing the DFC3 Daughter Card

This section contains two DFC3 daughter card removal procedures. One procedure covers how to remove the DFC3 daughter card from modules that are not equipped with a stiffener bracket. A second procedure is included that covers how to remove the DFC daughter card from early versions of the WS-X6748-GE-TX Ethernet module that are equipped with a stiffener bracket.

Note Only the WS-X6748-GE-TX Ethernet module might be equipped with a stiffener bracket.

Catalyst 6500 Series DFC3A, DFC3B, and DFC3BXL Installation Note

12 78-15893-06