Patton electronic 07M6070-UM user manual Storing

NanoServ™ User Manual 5 • Taking Care Of Your NanoServ™

Storing

•Do not place your NanoServ™ in a location that is subject to:

-Heating sources, such as a stove, oven, heater, radiator or air duct

-Direct contact from sunlight

-Rain or moisure

-Excessive dust accumulation

-High humidity

-Constant or occasional mechanical movement, vibration or shock

-Strong magnets, magnetic fields or magnetically unshielded speakers

-Ambient temperature of more than 95ºF (35ºC) or less than 32ºF (0ºC)

•Do not place other electronic devices or electronic equipment near your NanoServ™.

The electromagnetic field of the NanoServ™ may cause interference subjecting the unit to malfunction.

-Provide adequate air ventilation (circulation) to prevent internal buildup of heat. Do not place your NanoServ™ near the wall, behind the curtains or draperies, or in between two books that block its venti- lation slots.

-Leave a space of at least 8 inches (20cm) around the sides and the back panel of the NanoServ™.

•Change of environmental temperature: Problems may occur when there is a sudden change of environmental temperature. If the NanoServ™ is brought directly from a cold location to a warm one, moisture may condense inside the unit. Allow time for the system to reach normal temperature before use.

•Checking the surrounding appliance(s) before using your NanoServ™: Because the NanoServ™ uses a high-frequency radio signal, it may interfere with radio or TV reception causing inter- ference or poor signal display. When this happens, move the NanoServ™ to a suitable distance away from the set.

•Do not drop the NanoServ™ from the working table or place heavy objects on top of the NanoServ™.

Storing 22