NanoServ™ User Manual | 3 • Peripherals |
|
|
Introduction
This chapter shows how to connect various devices to the NanoServ™ System. Connect all the devices you will be using before turning on the power. The power adaptor should be connected last.
The Interconnecting cables shall be acceptable for external use and shall be rated for the proper application with respect to voltage, current, anticipated temperature, flammability, and mechanical serviceability
Connecting the monitor
Table 2. Connecting the monitor
VGA Connection
Depending on your preference, select a con- ventional CRT or LCD VGA monitor.
Connect the VGA cable of your monitor to the
*Note: Monitor not included.*
Connecting the USB
The system provides two USB ports (one in the front and one at the back of the case).
Table 3. Connecting the USB
Connecting the USB
A USB port is available on the front cabinet of the unit. Another port is available on the back of the unit.
Introduction | 14 |