66666 | 6 |
3.Release the clip on each side securing the memory module; the module will eject upwards.
Fig. 5 Removing memory module.
4.Carefully remove the memory module from the socket.
Note: In case two memory modules have been installed, you have to remove the top module first before you can remove the one underneath.
Wireless LAN Adapter
To remove the wireless LAN adapter (mini PCI Express), first remove the battery (see Battery on page 4) and then perform the following steps:
1.Remove the two screws securing the memory compartment cover (see Fig. 4 on page 5).
2.Lift the cover upwards from the left. There are two tabs holding the cover in place on the right. Raise the cover until you can remove it from the casing (see Fig. 4 on page 5).
3.Carefully disconnect the two WiFi antenna cables.
Fig. 6 Location of WiFi antenna cable connectors and screws.
Packard Bell EasyNote ST Disassembly Manual
