2525252525 | 25 |
2. Remove the two screws securing the TV antenna connector.
Fig. 40 Location of TV antenna connector.
3. Clear the cable and take out the TV antenna.
Touchpad
To remove the touchpad module, first remove the top cover (see Top Cover on page 11), and then do the following:
1.Carefully release the white clip securing the touchpad flat cable and disconnect the cable from the header on the top cover.
Fig. 41 Location touchpad cable and screws.
2.Remove the three screws securing the touchpad bracket to the top cover (see Fig. 41 on page 25).
3.Remove the touchpad module.
Note: The described procedure applies only to the touchpad buttons; the touchpad surface is part of the top cover.
Packard Bell EasyNote ST Disassembly Manual
