Packard Bell ST manual Battery, Hard Disk Drives

44444 4

Battery

Perform the following steps to remove the battery:

1.Make sure the power is off.

2.Turn the notebook upside down.

Note: Use an anti-static mat or something soft like a piece of cloth underneath the notebook to prevent damage to the exterior of the notebook.

3. Slide the battery lock/unlock latch (A) to the unlock position.

B

A

Fig. 1 Removing the battery.

4.Slide the battery release latch (B) to the release position (see Fig. 1 on page 4).

5.Lift the battery upwards; there are three tabs holding the battery in place at the back.

6.Take the battery out of the compartment (see Fig. 1 on page 4).

Hard Disk Drives

To remove the left hard disk drive, first remove the battery (see Battery on page 4) and then perform the following steps:

1. Remove the four screws securing the hard disk drives compartment cover.

Fig. 2 Removing hard disk drive compartment cover.

Packard Bell EasyNote ST Disassembly Manual