1717171717 | 17 |
5. Disconnect the optional Bluetooth cable from the header on the main board.
Fig. 28 Disconnecting optional Bluetooth cable.
6.Release the white clip securing the USB board cable and disconnect the audio board cable from the headers on the main board.
Fig. 29 Disconnecting USB board and audio board cables.
Note: On Fig. 29, one of the headers is partly covered by the flat cable.
7.Remove the three screws securing the main board (see Fig. 27 on page 16).
8.Carefully slide the main board a bit to the right to free the DVI connector and tilt the main board from the left.
Packard Bell EasyNote ST Disassembly Manual
