2323232323

23

1. Remove the three screws securing the subwoofer.

Fig. 38 Location subwoofer screws.

Note: On Fig. 38, one of the screws is partly covered by the DC jack cable.

2. Take out the subwoofer.

DC Jack

To remove the DC jack, first remove the Ethernet/USB board (see Ethernet/USB Board on page 20), and then perform the following steps:

1. Disconnect the DC jack cable from the header on the main board (see Fig. 27 on page 16).

Packard Bell EasyNote ST Disassembly Manual

Page 24
Image 24
Packard Bell ST manual DC Jack, Location subwoofer screws