NanoServ™ User Manual | 5 • Taking Care Of Your NanoServ™ |
|
|
Using cables for connection
•To avoid problems, use only the specified interface cables that match the system. The supplier will not be responsible for problems caused by improper connection with other devices or cables.
•Do not use cut or damaged cables to connect devices to the NanoServ™.
The Interconnecting cables shall be acceptable for external use and shall be rated for the proper application with respect to voltage, current, anticipated temperature, flammability, and mechanical serviceability
Cleaning your NanoServ™
•Clean the NanoServ™ with a soft, dry cloth or a soft cloth lightly moistened with a mild detergent solu- tion.
•Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine, as these may damage the finish of your NanoServ™.
•When a solid object falls or a liquid spills onto the NanoServ™, turn off the unit immediately and unplug the 10/100 Ethernet and power cables. Contact a qualified person or your dealer to check the NanoServ™ before you use it again.
•Always disconnect the power cord from the power source before cleaning the NanoServ™.
Using cables for connection | 23 |