Model 2977 DialFire RAS User Manual | 4 • Driver installation and configuration |
|
|
3.Highlight the adapter and choose Remove.
4.If you have installed external modems on an AccelePort Xp adapter or if you have configured internal modems on AccelePort or DialFire adapters, remove them from the Windows NT Modem list by doing the following:
–From the Control Panel, choose Modems.
–Choose the modem to remove, then choose Remove.
5.Restart Windows NT to complete the removal process.
Changing Serial Port Names
Use this procedure to change the name of a serial port in Microsoft Windows NT.
Procedure
1.Access the configuration utility by choosing Control Panel > Network > Adapters.
2.Choose your adapter from the list and then Properties. The adapter properties page appears.
3.If necessary, expose individual serial ports by clicking the + (plus sign) at the left of the Serial label.
4.Choose a port to rename and then Properties.
5.Supply a new name and then choose OK.
Driver installation for the Microsoft Windows NT operating system | 48 |
