cpeconfig show 30
Model 3231 CLI Reference Guide 3 • CPE Config Commands
cpeconfig show
Note This command is only available on the CO unit. Refer to the Getting
Started Guide for more information.
Show the CPE's configuration.
Example Output: cpeconfig show
--> cpeconfig show
Configuration State: Initializing
Timeslots: 36
IP Address: 192.168.200.10
Netmask: 255.255.255.0
Default Gateway: 0.0.0.0
Table 16. cpeconfig show
Command Explanation
cpeconfig show Show the CPE's configuration.