gshdsl show 73
Model 3231 CLI Reference Guide 6 • G.SHDSL Commands
gshdsl show

Display an atttribute for G.SHDSL.

Example Output: gshdsl show

--> gshdsl show
General Information:
Version : 1.00
Platform : Unknown
Zip Wire Version : Software:4.2.0 DSP Silicon:75.4 AFE:0.8
Connected : FALSE
Modem State : In Progress
Attributes Setting:
Action : Start
Clocking Combination : remote_receiverecover
Terminal : remote
DSLRate TS : 36
Serial TS : ACCESS FAILED
Data Rate I : 0
Actual Rate : 2304
Interface : atm
PCMMode : Ethernet
Loopback : Off
Clocking : Internal
TPClk Polarity : Normal
RPClk Polarity : Normal
Ghs Annex : AnnexA
Cnt Clear : Normal
Line Probe : Disable
IBit Mask : 0
LPOpt Rate : 0
TPSTCConfig : DoNotModify
Eth Link Kill : false
Status Information:
LBStatus : Off
Loss Of Signal : Signal Loss
Loss Of Sync Word : Sync Word Loss
Line Condition : Poor
Noise Margin : 0.0
Line Attenuation : 0
DSLSync State : Out Of Sync
Nb Dpll Lock : Not Locked
Dpll Lock : Not Locked
Rx Fifo Err : Normal
Tx Fifo Err : Normal
Tx Stuff Err : Normal
Valid TPClk : Valid TX PCM Clock

Table 53. gshdsl show

Command Explanation

gshdsl show Display all attributes.

gshdsl show <attrname> Display a specific attribute.