English
Operators Handbook English
Paxar Monarch 9640 Series
7Troubleshooting
The Paxar Monarch 9640 uses two LED’s to relay messages to the user. Below is a chart of what the combination of LED’s
LED Indication | Conditions | |
|
|
|
POWER and | READY LED’s both ON | 9640 is ready for printing |
|
|
|
POWER and | READY LED’s both flash | One of the following conditions may occur: |
in same phase | ● Out of label | |
|
| |
|
| ● Label gap detection problem |
|
| ● Label stuck or jammed |
|
| ● Paper sensor problem |
|
|
|
POWER and | READY LED’s both flash | One of the following conditions may occur: |
in reverse phase | ● Out of ribbon | |
|
| |
|
| ● Ribbon stuck or jammed |
|
| ● Ribbon sensor problem |
|
| |
POWER LED flashes | One of the following conditions may occur: | |
|
| ● Power voltage is too high |
|
| ● TPH temperature is too high |
|
| ● Memory overflow |
|
| ● Main board failure |
|
|
|
POWER and | READY LED’s both OFF | One of the following conditions may occur: |
|
| ● Power supply switched off or not |
|
| connected |
|
| ● Power adapter fuse is broken |
|
| ● Main board failure |
|
| ● LED Display board failure |
|
|
|
9640 Series
8
