E T H E R N E T S E T U P G U I D E
The Monarch→ 7411™ wireless Ethernet Print Server lets you communicate with a Monarch→ 9855® or 9860™ printer on a 10baseT or 100baseTX wired Ethernet network or on an 802.11b or 802.11g wireless network. The print server operates in
The print server supports multiple network protocols for users with Telnet/FTP, Microsoft→ Windows→ 98, 2000, NT→, XP, and Vista™, TCP/IP (including LPR/LPD, Bootp, DHCP, and HP JetDirect™), Novell→ NetWare→ and SNMP. All protocols are simultaneously active.
Note: When turning on the printer or after sending a ^PR (printer reset) immediate command, wait at least 30 seconds before sending data to the print server. Any data sent to the print server before the
S e t t i n g U p t h e P r i n t S e r v e r
From the Main menu, select Setup, Port Settings, then Parallel Comm. Then, follow these steps:
1. | Press or until you see | |||
|
|
|
|
|
|
| PARALLEL COMM |
| |
|
| Port |
| |
2. |
|
|
| |
Press Enter/Pause. Press or until you see | ||||
|
|
| ||
|
| PORT |
| |
|
| Internal |
| |
|
|
|
|
|
Paxar® is a trademark of Paxar Corporation.
Monarch→, MonarchNet2, 7411, and 9855® and 9860 are trademarks of Paxar Americas, Inc. a subsidiary of Avery Dennison Corp. Avery Dennison→ is a trademark of Avery Dennison Corp.
Microsoft, Windows, and NT are trademarks of Microsoft Corporation. Novell and NetWare are trademarks of Novell, Inc.
HP Jet Admin and HP Web Jet Admin are trademarks of
TC7411MN2SG Rev. AC 12/07 | ♥2006 Paxar Americas, Inc. a subsidiary of Avery Dennison Corp. |
| All rights reserved. All rights reserved. |
