Paxar TC9416CTIUM manual S e l e c t i n g t h e F o r m a t S e n d i n g M o d e

S e l e c t i n g t h e F o r m a t S e n d i n g M o d e

There are two Format Sending Modes: As Needed and Always. To send all formats at once, select Always. To send only the correct format, select As Needed. The default is As Needed.

1 . From the Config Menu, press ← or → until you see

1.Set Format Sending Mode

2 . Press Enter. You see

Select format sending mode 1=AS NEEDED, 2=Always >

The current setting is displayed in all caps.

3 . Press 1 or 2 to select the mode you need. You return to the Config Menu.

U s i n g B a t c h S e p a r a t o r s

A batch separator is an extra label printed in between batches (print jobs) with a pinstripe pattern. Only the 9825 and 9855 printers use this option. For non-indexed supply, the batch separator is always six inches long.

The name of the print job is shown on the batch separator.

Note: The 9416 printer does not use batch separators and ignores this setting.

Batch Separator

2-2User Manual