1 . From the Config Menu, press ← or → until you see
2.Set Separators
2 . Press Enter. You see
Set Batch Separators 1=Enabled, 2=DISABLED >
The current setting is displayed in all caps.
3 . Press 1 or 2 to enable or disable the separators. The default is Disabled. You return to the Config Menu.
U s i n g D a t a P r e l o a d i n g
The Preload Data function keeps any data you enter in memory when enabled. The default is Disabled.
1 . From the Config Menu, press ← or → until you see
3.Set Preloading
2 . Press Enter. You see
Set Data Preloading 1=Enabled, 2=DISABLED >
The current setting is displayed in all caps.
3 . Select 1 to retain data. If you press 2, the printer does not keep data you previously entered in memory. You return to the Config Menu.
Setting Up the Printer
