Peavey Automix2 AUTOMIXª 2 SPECIFICATIONS, Input Specifications, Phantom Power, Low Cut Filter

AUTOMIXª 2 SPECIFICATIONS

Nominal Out = 2.21 dBu = 1 Volt

Input Specifications:

Function	Input z	Input Gains		Input Levels			Bal./	Connector
	(ohms)	Setting		(to bal. outputs)			Unbal.
	Min		Min*		Nominal**	Max
Microphone	2k	Max Gain	-64dBu		-43dBu	-2dBu	Bal.	Mic In (+)
(150 ohms)		(60dB)	(0.5mV)		(5.5mV)	(615mV)		Mic In (-)
								Ground
Line	>20k	Max Gain	-35dBu		-14dBu	+27dBu	Bal.	Line In (+)
(10K ohms)		(30dB)	13.7mV		(155mV)	(17.4V)		Line In (-)
								Ground

*Minimum input level (Sensitivity) is the smallest signal that will produce nominal output (2.21dBu) with channel and master controls set for maximum gain.

** Nominal settings are defined s all control set at 0 dB (or 50% rotation for rotary pots.

EIN:		-122dBu (Max gain, terminated 150 Ohms)
Phantom Power:		+48 Volts at Mic ± terminated
Priority (Channels 1 and 2):		0dB to 9dB
Low Cut Filter:		-3dB at 100Hz (6dB per octave)
Common Mode:		>65dB at 20Hz Ñ 20kHz
Rejection Ratio:		>85dB @ 1kHz
Output Specifications:
	Minimum		Output Levels		Bal./	Connector
Function	Load Z				Unbal.	Main Out (=)
	(Ohms)	Nominal	Max
Main Out	600	+2.21dBu	+20dBu	+16dBm	Bal.	Main Out (+)
		(1V)	(7.75V)	(6.44V)		Main Out (-)
			(Hi Z load)	(600½ load)		Ground
Aux Out	600	+2.21dBu	+20dBu	+16dBm	Bal.	Aux Out (+)
		(1V)	(Hi Z load)	(600½ load)		Aux Out (-)
						Ground
Distortion:
Mic Input to Main Output:		<0.2% at nominal (20Hz to 20kHz)
Frequency Response:
Mic Input Main Output:		20Hz to 20kHz +0/-1 dB at nominal
Mic Input to Aux Output:		20Hz to 20kHz +0/-1 dB at nominal

9